Autowatch Ghost Installation
Autowatch Ghost is an immobiliser that safeguards you from key-cloning and hacking. It also stops theft of your vehicle. It can also help reduce the cost of insurance and could even be eligible for incentives.
The Ghost immobiliser that is discreet and easy to operate is built into the ECU of the vehicle. This means that it is impossible to start the engine without the secret PIN code.
TASSA Approved
Autowatch Ghost is the best method to prevent your car from being stolen by key copying. It has been approved by TASSA. It is the latest technology in car security and stops thieves in two ways. It will stop your car from starting if your keys are cloned and also stops you driving away if they've taken your key fobs.
The next generation device connects to your vehicle's CAN data network. A personalised PIN code is entered via the standard buttons of your vehicle on the dashboard or wheel. The Ghost will then stop the engine from beginning. It can be programmed using a variety of settings such as Gear Change Blocking (vehicle-dependent), Stall on Start (vehicle-dependent) or Lock Gearbox. It is completely undetectable and doesn't make use of radio frequency signals, which means that it cannot be detected by RF scanners or a 'code grabber'.
The Ghost is a small weatherproof device that is completely sealed. It can be installed on the dashboard or inside the vehicle. In contrast to other alarm and immobiliser systems available on the market, this isn't a Thatcham Category approved product, but is recognized by insurance companies as an effective anti-theft device. It comes with a 5 year warranty.
The TASSA verification process ensures that any installation work carried out on the Ghost will be done so by a trained and skilled installer. This gives the customer, insurers and police confidence in the integrity of any installation that is completed. This will also ensure that the installers abide by the directions of the product manufacturer and correctly install the product. Installers who are TASSA members are committed to excellence, and they desire to make a difference in the fight against criminality.
Compatible with a variety of vehicles
The Autowatch Ghost 2 immobiliser is an innovative device that protects your vehicle from key cloning. Its PIN code system is integrated into the car's ECU making it harder for thieves to clone the keys or hack the system of your vehicle. The device is also discreet and easily installable in a variety of vehicles such as minivans and sports automobiles. It's also weatherproof and small enough to hide out of sight making it harder for thieves to find.
Installation of the Ghost is easy and doesn't require any additional wiring. It is compatible with a variety of vehicles and connects to the vehicle's data network CAN. It is also able to be deactivated or switched off from the main screen of the vehicle. what is a ghost immobiliser is also compatible with a variety of mobile applications, making it simple for you to manage your vehicle's security remotely.
Despite its many advantages, the Ghost has certain issues that could arise after it is installed. These issues could be caused by a variety of factors like malfunctioning wiring or a non-compliant mobile application. In these instances, the best solution is to contact a professional installer to resolve the problem.
Another issue that users face is difficulty entering the Ghost's disarm sequence. This is usually due to not remembering the proper sequence or not practicing it. However, the device's manual contains an emergency code that can be used in case of such problems.
Distinction
Autowatch Ghost is an advanced and discreet security system that safeguards against vehicle theft. This device uses the vehicle's CAN data networks to work and is completely inaccessible to thieves, which makes it a highly effective deterrent. It can also be activated by security systems such as car alarms and can send real-time notifications to the owner. These features can assist police find your vehicle in the event of theft.
This system can be put in place in just a few minutes and is compatible with the majority of vehicles. It is an TASSA approved aftermarket device that is compatible with vehicle trackers. Some insurance companies even recognize it. It's also tamper-proof and silent, so criminals won't be able to hear it operating. The Ghost immobiliser can also be programmed to require a PIN that is up to twenty numbers. This makes it almost impossible to determine the PIN.
Ghost can only be used when the vehicle is in the Service/Valet Mode. This prevents you from accidentally giving the PIN number to a mechanic or any other person who needs to access the computer system of your vehicle. The Ghost comes with a five-year warranty.
The Autowatch Ghost immobiliser is a revolutionary security device that stops key copying, ECU hacking and car theft. It's an aftermarket CAN bus device that's an excellent alternative for both older and new automobiles. It is easy to install and operates quietly. This makes it possible to be fitted in any vehicle without cutting wires. It also lets you change your pin numbers easily and only you will know it. It also doesn't employ code-grabbing or RF scanning technologies which means it's nearly inaccessible.
Easy to use
Autowatch Ghost is a highly efficient and ingenuous security system that disables the engine to stop theft of the vehicle. It utilizes a personal code designed by the owner of the vehicle, that must be entered before the car can start. This cutting-edge technology enhances the overall security measures of your vehicle, making it a top choice for many motorists. This installation process is not without its challenges. It requires careful planning and attention to details. This includes ensuring compatibility, relying on professional expertise and adhering to the legal regulations, and comprehensively understanding the Ghost II's operation processes. Making these factors a priority will ensure the installation is successful and has optimal functionality.
In contrast to conventional systems unlike conventional systems, the Ghost II is silent and is not able to be detected by thieves. It is also compact and weatherproof, making it hard to get into. It is compatible with CAN, Lenastark and other vehicles. It is also able to be used in vehicles that require isolation of the battery for maintenance. The Ghost 2 also has a Transport Mode, which disables the device when your vehicle is being loaned or rented out.
To use the Ghost 2, you must have a personal PIN to enter prior to starting the vehicle. The installer will set a default PIN code for you, but for your own security it is recommended to change it as quickly as possible. The device can go into sleep mode to save the battery, but should it detect an engine management system, it will wake up and prevent the vehicle from starting. This feature can be disabled in the Settings menu. It is recommended to only use the Ghost immobiliser when your vehicle is driven, and to always secure it prior to leaving it unattended.
Easy to install
The Autowatch Ghost II, an advanced security system, prevents car thefts by removing a vehicle's engine. It operates by using a number that is unique to the owner, which makes it a potent deterrent. Installing this device requires a lot of attention to detail and careful preparation. By making sure that it is compatible, relying on professional expertise in compliance with legal regulations and comprehensively understanding the system's functions it is possible to ensure a seamless installation process and reap the maximum benefits from this security system.
This innovative CANbus immobiliser from Autowatch is simple to install and operates silently so criminals cannot hear it working. It makes use of the CAN bus to communicate with your vehicle and is compatible with a wide range of vehicles. It is a revolution in vehicle safety. It shields you from theft of your car and key cloning. It's weatherproof and small which makes it difficult for criminals to find it or modify it.
To begin using your Ghost Immobiliser, you need to look up the wiring diagram of your vehicle and locate the CAN high (CAN H) and CAN low (CAN L) wires. Connect the CAN high and CAN low wires to the ECU. The wires are located on the dashboard or near the engine.
It's best to hire a certified and trusted installer to install your Ghost immobiliser. This way, you can be sure that the system is properly installed and will not hinder your vehicle's capabilities. Additionally the installer will be able to advise you on how to use the new device effectively.